Using packaging machine for packaging can not only effectively improve production efficiency, but also reduce the work intensity of the staff, especially large-scale packaging-related companies simply cannot do without the packaging machine, which shows the importance of packaging machine. Once the packaging machine breaks down, it will greatly affect the work efficiency and enterprise efficiency, so today I will introduce you to the common failures and solutions of the packaging machine.

Trouble one: When using the packaging machine, the shrinking machine heats up slowly or does not reach the use temperature. This requires checking whether the holding points of the magnetic suction switch are operating normally. This will happen if one of the lines is not powered. If it is not caused by the magnetic switch, you need to check the electric meter to see if the ohmic value of each phase and the packaging machine are the same. If there is no problem, it may be caused by a short circuit.

Trouble two, when the packaging machine is working, the film material shifts, you can adjust the angle of the triangular plate. If it is the last deviation of the upper layer, the upper triangular plate needs to be adjusted in a clockwise direction, otherwise it is adjusted in a counterclockwise direction.